Your browser is out-of-date.
It has known security flaws and may not display all features of this and other websites. Please upgrade to one of these free browsers:
Looking for DCI Edge equipment? You can now find it at www.dciedge.com.
Posted in: Light Parts and Bulbs
Tips for easily installing DCI's Pelton & Crane LF II light arm
1. Do you have the tools you need to make an easy install/repair? If not, order the DCI Spring Adjustment Tool, PN 8697
2. The knuckle mounting screws should be torqued to 40 in-lbs
3. The pin is designed to permit removal or insertion in one direction only. DCI uses the same pin as the orignal manufacturer.
4. DCI machined two dimples on the drift screw to help align the set screw with the flats to prevent damage of the threads.
5. When replacing the LF II light spring, be proactive and replace the knuckle supports at the same time. You've already disassembled it, so a few more minutes can help prevent a return trip.
By , 07/07/2016 02:59 pm
By , 03/14/2016 04:25 pm
By , 03/04/2016 02:02 pm
By , 03/04/2016 01:54 pm
By , 02/26/2016 04:49 pm
Do you have any suggestions, feedback, or questions? Contact us and let us help.
It has known security flaws and may not display all features of this and other websites. Please upgrade to one of these free browsers: